ABSTRACT
OBJECTIVE@#To explore the prescription patterns of different dosage forms of Chinese herbal medicines (CHMs) for the treatment of rheumatoid arthritis (RA) and their effects on immune-inflammatory indices.@*METHODS@#Clinical data were collected from patients with RA in 4 hospitals (3 Class A comprehensive hospitals and 1 Class B comprehensive hospital) in Anhui Province, China, from August 2012 to June 2018 via the electronic medical record gathering system. Following extraction of prescription information, each prescribed herb was quantified and standardized according to the knowledge base to establish a database of RA treatment formulae. The medical records were divided into the granules group and decoction pieces group. Core herbs and their combination patterns were obtained from the two groups of cases using Liquorice software. Changes in immune-inflammatory and hepatic and renal function indices were compared between the two groups using SPSS 23.0 software. The Aprior module of SPSS Clementine 11.1 software was applied to analyse the correlation between CHMs and improvement in indices. Finally, the ORACLE 10 g tool was used to evaluate the random walk model of the immune-inflammatory indices between the two groups.@*RESULTS@#(1) We retrospectively analysed 35,898 prescriptions for 6,829 patients with RA who received CHM treatment. There were 3,816 patients in the granules group and 3,013 in the decoction pieces group. (2) The core herbs were Pi (Spleen)-strengthening and dampness-resolving drugs, blood-activating and stasis-resolving drugs, wind/dampness-dispelling drugs and heat-clearing and detoxifying drugs. (3) Both dosage forms could improve immune-inflammatory indices in RA patients, with similar efficacy and no influence on hepatic or renal function. (4) Herba Siegesbeckiae and Oldenlandia had a stronger association with immune-inflammatory indices in the two groups. (5) The immune-inflammatory indices showed obvious improvement after treatment with granules and decoction pieces of CHMs, and there were long range correlations between the comprehensive evaluation indices and interventions.@*CONCLUSIONS@#The principal CHM treatment methods for RA in four hospitals in Anhui Province are strengthening Pi and resolving dampness, activating blood and resolving stasis, dispelling wind/dampness and clearing heat. Granules and decoction pieces of CHMs have similar efficacy in improving immune-inflammatory indices in RA patients and could be used as treatment options for RA.
Subject(s)
Humans , Arthritis, Rheumatoid/drug therapy , Data Mining , Drugs, Chinese Herbal/therapeutic use , Medicine, Chinese Traditional , Prescriptions , Retrospective StudiesABSTRACT
Objective:To evaluate the scientificity and feasibility of processing of Pinelliae Rhizoma by hot water washing （Tangxi）， and to provide reference for the development of related famous classical formulas. Method:Processing method of Pinelliae Rhizoma washed by hot water was established based on ancient Tangxi processing method， and the process conditions were optimized by single factor tests. The weight， moisture， ash， extract， total acid （calculated by succinic acid） contents and high performance liquid chromatography （HPLC） fingerprint of Pinelliae Rhizoma were compared before and after processing. In addition， the rabbit eye irritation test was conducted to evaluate the toxicity changes. Result:The processing method of Pinelliae Rhizoma washed by hot water was as following：washed by 4 times the amount of hot water at 80 ℃ for 10 times until clear water， transfused cross-section after incision， no or slight numbness in the mouth. The average moisture， ash， extract contents of Pinelliae Rhizoma washed by hot water were 9.34%， 1.71% and 4.22%， respectively. After being processed， the decline rates of weight and total acid content of Pinelliae Rhizoma were 7.49% and 43.31%. The HPLC fingerprint of Pinelliae Rhizoma before and after washing showed a decrease in all components， but there was no new chromatographic peak， and peak 9 （adenosine） reduced significantly. The results of rabbit eye irritation test showed that there was no obvious eye conjunctival irritation after washing， indicating that the toxicity of Pinelliae Rhizoma decreased obviously after washing. Conclusion:The established method of Pinelliae Rhizoma by Tangxi processing is stable and feasible， the aqueous extract of Pinelliae Rhizoma has no obvious eye conjunctival irritation after washing.
ABSTRACT
Objective::To finding the main research contents, research frontier, author and institutional cooperation of traditional Chinese medicine(TCM) for treating henoch-schonlein purpura(HSP). Providing reference for the research and development of TCM for treating the disease. Method::Using Citespace to analyze 2 878 TCM articles related to HSP retrieved from CNKI, cluster analysis and burst analysis of literature keywords, co-occurring authors and institutional cooperation analysis. Result::Since 1995, the number of related literature was growing rapidly and had been stable at more than 100 per year after 2005.Cluster analysis showed 32 clusters, consisting of 396 nodes and 638 lines. The main clustering results include Children with allergic purpura, blood-activating and stasis-resolving drug, Henoch-Schonlein purpura nephritis, blood-cooling drugs, clinical observation, etc. Break analysis yielded 52 emergent words. It can be seen that TCM treatment of HSP is mainly based on cooling blood, followed by activating blood to eliminate stagnation and clearing heat. Commonly used drugs are Moutan Cortex, Paeoniae Radix Rubra, and Rehmanniae Radix, etc. Clinically, it pays more attention to the experience of famous doctors, research on Children with allergic purpura, etc.The author's cooperation network has obtained the maps of the three main cooperation teams with DING Ying, SUN Yi-qiu and HE Ping as the core. The Density of institutional cooperation network is 0.007 1. Conclusion::The main research contents of TCM for treating HSP include Children with allergic purpura, blood-activating and stasis-resolving drug, HSP nephritis, blood-cooling drugs, clinical observation, etc. Children with allergic purpura, experience from famous doctor, HSP nephritis and clinical efficacy is the foremost current research hotspot. A number of research teams have been formed that are relatively stable, but the institutional cooperation is scattered.
ABSTRACT
Objective: To optimize the recovery technology for 6 kinds of toxic alkaloids in the toxic wastewater from processing of Aconiti Radix with macroporous resin. Method:With the rates of adsorption and elution of benzoylmesaconine,benzoylaconine,benzoylhypaconine,mesaconitine,hypaconitine and aconitine as indexes,static and dynamic adsorption-elution tests were used to select the best one from 15 kinds of macroporous resin,and the recovery technology parameters of six toxic alkaloids in the wastewater from processing of Aconiti Radix were optimized. Result:D101 macroporous resin had a good adsorption and elution effect on 6 kinds of toxic alkaloids in the wastewater from processing of Aconiti Radix,its optimum technology conditions were as follows:each gram of macroporous resin could be used to treat processing wastewater from 4.3 g of Aconiti Radix,the sample loading speed was not higher than 3.0 mL·min-1,the resin column was eluted with 6 BV of 70% ethanol after removing impurities with 2 BV of water.The recoveries of benzoylmesaconine,benzoylaconine,benzoylhypaconine,mesaconitine, hypaconitine and aconitine were 98.03%,94.09%,96.53%,78.15%,85.40% and 70.57%,respectively. Conclusion:D101 macroporous resin can be used for detoxification treatment of processing wastewater of Aconiti Radix,at the same time,6 kinds of alkaloids are effectively recovered,which can solve the environmental problems and create certain economic benefits,and the optimized process conditions are stable and feasible.
ABSTRACT
One case of family chromosomal karyotype with complex chromosomal translocation and male infertility was reported. This case is a male, 30 years old, Han nationality, who did not receive contraception for 3 years after marriage. The phenotype and intelligence of the patients were normal, and there were no abnormalities in the external genitalia. No abnormalities were found in the prostate and spermatic vein. There was no history of parotitis or testicular trauma, no history of smoking, drinking history, denial of harmful substances and history of radioactive contact. There were no similar patients in the family, and the secondary sex was normal. The routine semen examination suggested that the active sperm was seldom seen. There were no obvious abnormalities in the serum endocrine examination of the patient. Cytogenetic examination: the patient's karyotype 46XY, t (10; 18; 21) (q22; p11.2; q11.2). There was no deletion in locus sY84, sY86, sY127, sY134, sY143, sY254 and sY255. His wife's examination showed no obvious abnormality, and her karyotype was normal. The parents of the patients were not close relatives. Their father's chromosome karyotype analysis was 46, XY, and Y chromosome microdeletion was normal. The chromosome karyotype of the parent was 46XX, t (10; 18; 21), and the parents of the patient also had a daughter, whose phenotype and intellectual development were normal, chromosome karyotype 46XX, t (10; 18; 21). In this case, the patient's balance translocation should be inherited by the mother. Because of the normal phenotype of the patient, there was no loss of genetic material, but the abnormal chromosomes might be passed to the offspring, and the proportion of the unbalanced gametes was very high. Through systematic review and review of the cases, it was concluded that the balanced translocation carriers only changed the relative position of the translocation segments on the chromosomes, retained the total number of the original genes, only changed the relative position of the genes on the chromosomes, and had no serious effect on the role of the gene and the development of the individual. The phenotype was normal. The patients were given symptomatic treatment to improve semen quality. It is recommended that pre-implantation genetic screening/diagnosis(PGS/PGD) be performed if necessary. It is to guide married men and women to choose the appropriate childbearing age, avoid unhealthy environmental contacts, and strengthen genetic screening before and after pregnancy, so as to achieve the goal of eugenics.
Subject(s)
Adult , Female , Humans , Male , Pregnancy , Chromosome Deletion , Chromosomes, Human, Y , Infertility, Male/genetics , Karyotype , Semen Analysis , Translocation, GeneticABSTRACT
Objective:To study the biological safety and biocompatibility of the mixture of Paris polyphylla-chitosan.Methods:According to the GB/T 16886.12-2005 standard,YY/T 0279-1995 standard and GBT16886.5-2003 standard,samples were prepared and tested by oral mucous membrane irritation test,cytotoxicity test and flow cytometry.Results:No local response to the mixture of Paris polyphylla-chitosan was found,and the visual observation and pathological findings of oral mucosa were normal and similar to that of the control group.Therefore,the mixture of Paris polyphylla-chitosan had no irritation response to oral mucosa.The mixture of Paris polyphylla-chitosan showed no cytotoxicity to L929 cells,and did not affect the cycle distribution and apoptosis of L929 cells.Conclusion:The mixture of Paris polyphylla-chitosan has good bio-safety and biocompatibility.
ABSTRACT
Objective:To compare the wear resistance between dentin and dental restoration material in vitro.Methods:The friction and wear behaviors of natural tooth dentin respectively against highly polished polymer ceramic,glass ceramic and zirconia were investigated in an artificial saliva test environment by UMT-2 friction and wear testing machine.Worn surface morphology was observed by scanning electron microscopy(SEM),roughness was measured by roughness instrument,the rigidity value was weighed by electronic balance.Results:The roughness of the 3 materials was similar to that of dentin(P ＞ 0.05),the rigidity of dentin was less than that of the 3 materials (P ＜ 0.05).After friction and wear test,the abrasion quantity of dentin respectively against the 3 materials was less than that of the materials (P ＜ 0.05).There was positive correlation between the wear loss and the hardness of the 3 materials and dentin(r =0.846).The mass loss of the dentin against Poly Ceramic after grinding abrasion was the closest among the 3 materials.Conclusion:Different materials have varying degrees abrasion against dentine.The Polymer Ceramic has closer abrasion performancez with dentin than the other 2 materials.
ABSTRACT
<p><b>OBJECTIVE</b>To investigate the effect of different surface treatment of zirconia and to find the best way to reduce the wear of its antagonist.</p><p><b>METHODS</b>Twenty-five plates(5 mm×10 mm×15 mm) made of zirconia were divided into five equal groups. Group A was only ground, group B was ground and polished, group C was ground and polished then polished by prophylaxis paste, group D was ground and glazed, group E was ground, polishsed, and then reglazed. Five central incisors were embedded in autopolymerizing acrylic resin with a size of 5 mm×10 mm×15 mm as the control group F. Thirty upper premolars buccal cusps were prepared as the antagonist. Cusps were embedded in autopolymerizing acrylic resin with a shape of circular column whose diameter were 3.1 mm. The wear test was performed in the universal micro-tribotester in artificial saliva. The roughness of each group was measured with rough meter before the wear test. The volume loss of the antagonist was measured using a 3D scanner. The wear surface was observed with scanning electron microscopy to determine the wear characteristics. Data were analyzed using one-way analysis of variance.</p><p><b>RESULTS</b>Each group of surface roughness and mass loss of antagonist showed significant statistical difference (P<0.05). Antagonist of group D showed the maximum volume loss([0.905±0.018] mm3). Antagonist of control group showed the least volume loss([0.235±0.017] mm3). Antagonist of group C showed less volume loss than antagonist of control group did([0.413±0.017] mm3). Wear type of enamel of control group and the antagonist of the groups in which the samples were polished with prophylaxis paste was fatigue wear, and the other groups showed abrasive and adhesive wear.</p><p><b>CONCLUSIONS</b>In the surface treatment methods of zirconia, polishing is better than glazing. Ground and polishing and then polishing with prophylaxis paste can decrease the wear of the antagonist.</p>
Subject(s)
Humans , Bicuspid , Dental Enamel , Dental Polishing , Materials Testing , Microscopy, Electron, Scanning , Surface Properties , Tooth Crown , Tooth Wear , ZirconiumABSTRACT
Objective To analyze the occupational characteristics in patients with avascular necrosis of femoral head and related factors.Methods A random sample of 1062 patients with avascular necrosis of femoral head of inpatient medical record data from 2007 to 2008 was selected, all patients were confirmed by X-ray, CT, MRI or radionuclide bone scan.Patients were assigned to three groups of agriculture (320 cases), non-agricultural (424 cases), the other(318 cases) groups by different occupation.The patient's age, gender, ethnicity, single or bilateral, etiology, staging, time of onset and region were compared in each group.Results The proportions of gender (male/female) were 21.94％ (233/1062) and 8.19％ (87/1062) in agriculture group,32.77％ (348/1062) and 7.16％ (76/1062) , 21.66％ (230/1062) and 8.29％ (88/1062) in non-agricultural and the other groups respectively.The proportions of region (Northeast, North, East, South, Southwest, Northwest of China) were 3.30％ (35/1062), 8.00％ (85/1062), 8.10％ (86/1062), 4.80％ (51/1062), 3.11％(33/1062) ,2.82％ (30/1062) in agriculture group, 8.29％ (88/1062), 10.08％ (107/1062), 7.72％ (82/1062), 7.25％ (77/1062), 2.26％ (24/1062), 4.33％ (46/1062), and 4.05％ (43/1062), 8.38％ (89/1062) ,8.10％(86/1062) ,4.61％(49/1062) ,2.17％(23/1062) ,2.64％(28/1062) in the group of non-agricultural and the other.The proportions of etiology (alcohol, hormones, trauma, two or more, the other) were 5.46％ (58/1062), 6.97％ (74/1062), 4.43％ (47/1062), 0.94％ (10/1062), 12.34％ (131/1062) in agriculture group, 10.55％ (112/1062), 7.72％ (82/1062), 5.74％ (61/1062), 2.26％ (24/1062), 13.65％ (145/1062), and 4.90％ (52/1062), 5.93％ (63/1062), 4.90％ (52/1062), 0.66％ (7/1062), 13.56％ (144/1062) in the group of non-agricultural and the other.The proportions of gender, region, etiology in each group were analyzed by x2 test, the differences were statistically significant (x2 =12.77, 24.55, 26.36, P ＜0.05).The onset time and ARCO staging in each group, the correlations were analyzed by Spearman test, the differences were statistically significant(rs =0.282,0.232,0.208, P＜0.05).The onset of time and average age in different occupational group with different, due to factors such as gender, ethnicity, single or bilateral, region, and so on.Conclusion Patients with avascular necrosis of femoral head in different occupational group have different epidemiological characteristics.The occupational characteristics analysis can provide scientific data for diagnosis,treatment and prevention in patients with avascular necrosis of femoral head.
ABSTRACT
Objective To discuss the possibility for regeneration of knee joint with normal function under bionics biomechanical environment. Methods Seven normal rabbits with two metal frames respectively mounted on their femur and tibia of single (right) side leg by two threading pins of 1.5 mm diameter were used. Then the external artificial joints, containing two four-bar-linkage inside and outside of the knee to simulate motion trajectory of the joint in sagital plane were connected with the two preset fixed frames before osteotomy. The arthro-cartilage of the knee joint, crucial ligaments, semi-lunar fibro-cartilages, and partial under-cartilage-osseous intra articular capsule were cut off during osteotomy, with the patella, sesamoid bones remained intact. Insertion sites of muscle tendons were not invaded as far as possible, and capsules with ligaments outside were kept complete when the incision wound was closed by suture. The rabbits could move freely after osteotomy. The range of motion (ROM) of the knees in sagital plane and bony gap between the femur and tibia were measured by X-Ray films during the fracture healing after osteotomy. Results External artificial knee joints were successfully installed on right legs of 6 rabbits among the seven. The rabbits moved freely after osteotomy under the control of minimal invasive external artificial joint in bionics trajectory. The average angles between femoral shaft and tibial shaft at the 1st week after osteotomy were from (144.7±15.62)° in extremely flexed position to (44.2±25.77)° in extremely extended position, with ROM of (100.5±29.03)°. At the 12th week, the average angles were from (139.4 ± 12.92)° in extremely flexed position to (40.4±22.04)° in extremely extended position, with ROM of (99.0±23.39)°. No significant differences were displayed in flexed/extended position and ROM between the 1st and 12th week, with the bony gaps of the knees still existed but decreased significantly from (4.03±1.84) mm at the 1st week to (2.32±1.05) mm at the 12th week. In contrast, bony gaps of the opposite knees were not changed significantly, which were (1.27±0.22) mm on average. At the end of 16th week after osteotomy, the external artificial joints were removed. Newly born cartilage, with white color and smooth surface, were covered at lower end of the femur and upper end of the tibia. Typical trochlear surface appeared at the front side of regenerated cartilage corresponding to the posterior surface of the patella. And the regenerated fibro-bundle linkage similar with ligament, which started from bony structure of regenerated lower end of the femur and inserted into regenerated upper end of the tibia, was observed in each rabbit. At the 25th week, the average angles between femoral shaft and tibial shaft were from (148.3 ± 4.75)° in extremely flexed position to (48.30±17.57)° in extremely extended position, with ROM of (100.0±20.80)°. In the opposite (left) leg, the average angles between femoral shaft and tibial shaft were from (148.3±7.5)° in extremely flexed position to (21.6±9.09)° in extremely extended position, with ROM of (126.7±6.88)°, and the average bony gap of the knees after osteotomy was (1.4±0.59) mm, while that of the opposite (left) knees was (0.92±0.35) mm. Conclusions The external artificial joint with bionics trajectory could reserve the space for regeneration of rabbit knee joint by providing motion modeling environment, and proved the stress adaption during fracture healing. The present results indicated that regeneration of the knee joint after intra-capsular osteotomy in bionics biomechanical environment was possible.
ABSTRACT
Objective:To study the surface structure and antibacterial property of Ag-containing coating(AgCC)on casting cobalt chromium alloy(Co-Cr).Methods:Plasma spraying technique was adopted to prepare AgCC on Co-Cr.Scanning electron microsco-py,energy dispersive analysis and X-ray diffraction analysis were used to evaluate the surface properties.The antibacterial effects of AgCC against staphylococcus aureus and candida albicans were examined by film attachment method.Fluorescence microscope was a-dopted to evaluate the bacteria adhesion property.Results:AgCC surface was uniform and compact,combined perfectly with sub-strate material.The content of the surface was mainly Ag,Cr and a small amount of Ag2 O and Cr2 O3 .The results of antibacterial as-say showed that on AgCC the number of bacterial colony was fewer(P<0.05)and bacterial adhesion was less than those on Co-Cr(P<0.05).Conclusion:AgCC surface was stable and has antibacterial property.
ABSTRACT
Objective To investigate the regular pattern of traction forces during the treatment of distal radius fracture by reduction fixator with pins. Methods A self-designed pin-lock style force transducer instead of two original pin locks in the distal of reduction fixator was adopted to conduct continuous testing on six cases of unstable distal radius fracture of forearms treated by reduction fixator in vivo. The value of static traction force and the added value of traction force in fist clenching at the postoperative 1st, 5th, 14th, 21st, 28th, 35th, 42nd, 49th day, was recorded respectively. Results The maximum and minimum static traction force was 9.93 kg and 2.26 kg, respectively, with mean value of (4.93±1.79) kg. The maximum and minimum traction force increment in fist clenching was 10.40 kg and 0.13 kg, respectively, with mean value of (3.17±2.42) kg. Conclusions Larger axial forces can be generated in muscles of the forearm, by both static tension and dynamic contraction, which might be a serious negative factor in healing unstable distal radius fractures.
ABSTRACT
<p><b>OBJECTIVE</b>To investigate the effects of the leaching liquids of 4 differents kinds of dental alloys (Au alloy, Ag-Pd alloy, Co-Cr alloy, Ni-Cr alloy) on apoptosis related gene and protein of fibroblast L929.</p><p><b>METHODS</b>The L929 cells of mouse were treated in vitro with leaching liquids of 4 different kinds of dental alloys, Au alloy (group A), Ag-Pd alloy(group B), Co-Cr alloy(group C) and Ni-Cr alloy(group D). The RPMI1640 cell medium containing 10% fetal calf serum was served as a control(group E). The effects of these alloys on the expression of caspase-3, 8, 9 of L929 cells were examined by reverse transcription-polymerase chain reaction (RT-PCR) and immunohistochemistry method. Results After 48 h culture, the mRNA levels of caspase-3 and caspase-9 demonstrated significant differences between the groups expect group A and group E. The mRNA levels of caspase-8 had no change in all groups. The expression of caspase-3 and caspase-9 were significant differences between the groups expect group A and C, group B and D. The expression of caspase-8 had no change in all grotps.</p><p><b>CONCLUSION</b>The leaching liquids of 4 different kinds of dental alloys expect Au alloy may induce cell appotosis through mitochondrion pathway.</p>
Subject(s)
Animals , Mice , Apoptosis , Chromium Alloys , Dental Alloys , Fibroblasts , Materials TestingABSTRACT
Purpose To evaluate renal function recovery state with color Doppler ultrasound before and after ultrasonic pneumatic ballistic lithotripsy under percutaneous nephrolithotomy. Materials and Methods 79 patients with 81 kidneys with upper urinary tract stones underwent ultrasonic pneumatic ballistic lithotripsy under percutaneous nephrolithotomy, renal parenchymal thickness, renal collecting system separation degree and renal arterial resistance index (RI) were measured with color Doppler ultrasound before and after the operation, subjects were divided into renal dysfunction group (both preoperative and postoperative GFR 20 ml/min), renal function significantly impaired group (postoperative GFR less than preoperative GFR, the difference>20 ml/min) and no significant improvement group (both preoperative and postoperative GFR were >20 ml/min, the difference 4.27 cm, IRA RI and MRA RI>0.8 as diagnostic standard for kidney dysfunction; and the sensitivity and specificity were 87.4% and 85.7%respectively when taking IRA RI4.27 cm, IRA and MRA RI >0.8, and IRA RI <0.72 can be regarded as clinical reference standard for renal function prognosis of kidney dysfunction and hypo-functional before conducting ultrasonic pneumatic ballistic lithotripsy under percutaneous nephrolithotomy.
ABSTRACT
Objective The toxicological compatibility of Aconiti Carmichaeli Radix, as a toxic Chinese medicinal herb, combined with the other ingredients in Sini Decoction was investigated to elucidate the rationality of the combination of the ingredients in Sini Decoction from toxicological point of view. Methods Three kinds of experiments, acute toxicity in mice, heart toxicity in rats and aconitines level in water extract of Sini Decoction and its ingredients including Aconiti Carmichaeli Radix alone and its combination with licorice or dried ginger were adopted in this study. In the toxicological experiments, LD50 values for the acute toxicity test and TD50 values for the heart toxicity (arrhythemia as a parameter) of Sini Decoction, Aconiti Carmichaeli Radix alone and its combination with licorice or dried ginger were comparatively determined. And levels of individual aconitines of the water extracts from Sini Decoction, Aconiti Carmichaeli Radix alone and its combination with licorice or dried ginger were measured, respectively. Results The LD50 and TD50 of the combination of Aconiti Carmichaeli Radix and licorice in Sini Decoction were found to be higher than Aconiti Carmichaeli Radix alone or Sini Decoction, while the LD50 and TD50 of the combination of Aconiti Carmichaeli Radix and dried ginger appeared to be not different from those of Aconiti Carmichaeli Radix alone. The level of the main toxic compound of the water extracts for the combination of Aconiti Carmichaeli Radix and licorice, and Sini Decoction was lower than that of Aconiti Carmichaeli Radix alone and its combination with dried ginger. Conclusion The combination of Aconiti Carmichaeli Radix and licorice can attenuate the toxicity of Aconiti Carmichaeli Radix.
ABSTRACT
<p><b>OBJECTIVE</b>To detect cobalt chromium alloy antimicrobial coating silver of the surface structure and the cell toxicity in order to provide a theoretical basis for clinical application.</p><p><b>METHODS</b>Plasma spraying technique was adopted to prepare cobalt chromium alloy antimicrobial coating silver. Scanning electron microscopy, energy dispersive analysis and X-ray diffraction analysis were used to evaluate the surface properties. The methyl thiazolyl tetrazolium and flow cytometry method was adopted to test the L929 cell proliferation and the influence of the cell cycle.</p><p><b>RESULTS</b>The surface of the coating was uniform and compact, combined perfectly with substrate material. The content of the surface was mainly Ag, Cr and a small amount of Ag(2)O, Cr(2)O(3). After cobalt chromium alloy was cultured in leach liquor for 1, 2 and 3 days, the statistical result showed that there was no significant different between the three groups. The cytotoxic level of negative control group was level 0 at each time point and that of other groups was level 1 at each time point. There was no significant difference between cobalt chromium alloy and cobalt chromium alloy antimicrobial coating silver in cell toxicity (P > 0.05). There was no statistical significance of the influence on cell cycle between cobalt chromium alloy with Ag coating [the G2's rate of cell cycle was (8.23 ± 0.39)%] and cobalt chromium alloy group [the G2's rate of cell cycle was (8.70 ± 0.46)%] (P > 0.05).</p><p><b>CONCLUSIONS</b>The surface of the coating was stable and there was no significant difference between cobalt chromium alloy widely used in clinic and cobalt chromium alloy with Ag coating of the influence on proliferation of L929 cell and cell cycle, the cell compatibility of cobalt chromium with Ag coating is well.</p>
Subject(s)
Animals , Mice , Cell Cycle , Cell Line , Cell Proliferation , Chromium Alloys , Chemistry , Toxicity , Dental Casting Technique , Fibroblasts , Cell Biology , Microscopy, Electron, Scanning , Silver , Chemistry , Toxicity , Surface Properties , X-Ray DiffractionABSTRACT
Objective An effective but simple method for quantifying the fracture healing progress was provided to obtain more information on fracture healing mechanics from plain X-ray film. Method Twelve rabbits were used for experimentally osteotomy at the middle tibiae, each of which was fixed by the sliding fixator with four pins of 1.5 mm diameter, with mini transducer of displacement measuring the sliding micro movement between the fractured bone fragments, denoted as ΔL. The bending rigidity, denoted as K=P/ ΔL, of the rabbits’ tibia (with sliding fixator together) were recorded by computer data assembling system once a week, where P was the load on the fracture site from anterior of the tibia by manual operation of a loading transducer. The anterior posterior and lateral radiographs were also taken every week by digitally upgraded X-ray radioscope. The effective weakest transverse curved interfaces were found, and the equivalent bending moments of inertia were calculated from the radiographs automatically, by gray scan along the longitudinal axis of the tibia upon the image programs edited in Delphi programming environment. And they were used for quantitative description of the rigidity of the healing bone. Results The sliding fixators were removed in 29~41 days after the osteotomy. Ratios of the minimum to the maximum of equivalent bending moments of inertia for each fracture bone were calculated. And they were found to increase via the healing time. The means of the ratios of all twelve rabbits calculated from lateral radiographs were (0.31±0.17) for the first week, (0.34±0.13) for the second week，(0.43±0.20) for the third week, and (0.56±0.23) for the fourth week after the osteotomy, respectively. From anterior posterior radiographs, the means of the ratios were (0.40±0.19), (0.47±0.16)， (0.56±0.20), and (0.66±0.11), respectively. These ratios were significantly correlated with the bending rigidity K of the fracture tibia of the rabbits. The means of K value was （3.976±4.986）N•μm-1 before the operation，and （0.679±1.026）N•μm-1 for the first week，（2.115±3.233）N•μm-1 for the second week，（3.459±4.723）N•μm-1 for the third week and （4.788±4.831）N•μm-1 for the fourth week after the operation, respectively. Conclusions The growth of external callus has its own rules. It can be distinguished from plain radiographs easily, and it grows from either side of the fracture site and meets together gradually, filling up the gap at the fracture site at last. The methods described in this paper could reflect the feeling when reading the radiographs.
ABSTRACT
To establish a HPLC method for the determination of vaccarin in Vaccariae Semen. Analysis was carried out on an Alltima-C18 column (4.6 mm x 250 mm, 5 microm) eluted with methanol -0.3% phosphoric acid as mobile phase in gradient elution. The flow rate was 1.0 mL x min(-1) and detected wavelength was set at 280 nm. The peak areas and injection ammounts of vaccarin showed a good linear relationship in the range of 0.102-1.539 microg, R2 = 0.9997. The average recovery was 100.4%, RSD was 0.81%. The results of the assay of 10 samples showed that the contents of vaccarin varied in the range of 0.46%-0.57%. The method is simple, accurate, reproducible and specific. It can be used for the quality control of Vaccariae Semen.
Subject(s)
Chromatography, High Pressure Liquid , Drugs, Chinese Herbal , Reproducibility of Results , Vaccaria , ChemistryABSTRACT
Using Affymetrix's Chicken Genome Array, we used total RNA isolated from the gonads of male and female chicks at embryonic day 9 to identify the genes differentially expressed between male and female. Statistical results show 19 493 genes expressed in male chick's embryonic gonads and 19 368 genes expressed in female. There were 145 genes specificity expressed in male and 189 genes in female. The gene ontology classification (GOC) indicated these differentially expressed genes were mainly involved in cellular component, cell process and molecular banding, a part of genes were involved in organelle component, metabolic process, biologic process, catalytic activity and signal transducer activity. Some genes had reported for sex determination and differentiation in birds, such as avian sex-specific avian sex-specific W-linked, chomodomain-helicase-DNA-binding protein 1 and sex determining region Y-box 9. In addition, we also found several genes or hypothetical proteins were unknown function for the gonad differentiation and development, focus to their biological function and expression pattern in further works would provide a beneficial reference for understand the mechanism of sex differentiation and determination in birds.
Subject(s)
Animals , Chick Embryo , Female , Male , Gene Expression Profiling , Gene Expression Regulation, Developmental , Gonads , Embryology , Metabolism , Oligonucleotide Array Sequence Analysis , Sex Differentiation , Genetics , Sex-Determining Region Y Protein , Genetics , MetabolismABSTRACT
<p><b>OBJECTIVE</b>To investigate effects of the leaching liquids of 5 different kinds of dental alloys on L929 cells at cell level and molecular level.</p><p><b>METHODS</b>The fibroblast L929 cells of mouse were cultivated in vitro in leaching liquids of 5 different kinds of dental alloys, Au alloy (n = 8), Ag-Pt alloy (n = 8), Co-Cr alloy (n = 8), Ni-Cr alloy (n = 8), and Cu alloy (n = 8). The RPMI 1640 cell medium containing 10% fetal beef serum was used as control. The cytotoxicities of the 5 dental alloys were evaluated by means of methyl thiazolyl tetrazolium (MTT), and the effects of these alloys on the expression of caspase-3, caspase-8, and caspase-9 mRNA of L929 cells were examined using reverse transcription polymerase chain reaction (RT-PCR) method.</p><p><b>RESULTS</b>After 48 hours culture the cytotoxicity of Cu alloy group was in Grade 4 and those of the other groups were all in Grade 0. The mRNA levels of caspase-8 had no change in all groups (P > 0.05). The mRNA levels of caspase-3 were as follows: Cu alloy (0.474 +/- 0.001), the negative control (0.527 +/- 0.003), Au alloy (0.528 +/- 0.013), Co-Cr alloy (0.615 +/- 0.007), Ag-Pd alloy (0.673 +/- 0.009), and Ni-Cr alloy (0.803 +/- 0.037). The mRNA levels of caspase-9 were as follows: Cu alloy (0.532 +/- 0.041), Au alloy (0.574 +/- 0.013), the negative control (0.578 +/- 0.010), Co-Cr alloy (0.617 +/- 0.009), Ag-Pd alloy (0.703 +/- 0.018), and Ni-Cr alloy (0.811 +/- 0.037). There were significant differences between the groups except the negative control group and Au alloy group.</p><p><b>CONCLUSIONS</b>The Cu alloy shows the highest cytotoxicity, and the leaching liquids of 5 different kinds of dental alloys may induce cell apoptosis through mitochondrion pathway.</p>